Handy Hazardous Area Classification Guide

The electrical classification term "Hazardous Location" refers to areas where flammable gases, vapors, liquids, combustible dusts, ignitable fibers or flyings are present in the atmosphere in sufficient volume to cause an explosion of fire.

Electrical equipment placed in hazardous locations must be carefully selected and applied in accordance with national and international "HazLoc" (sometimes referred to as explosion-proof) standards. These standards evaluate the threat of explosion based on quantitative and qualitative criteria such as material phase, specific gas of liquid, and likelihood of exposure.

SOR, a world leading manufacturer of process control instrumentation, offers a handy quick reference page on their website. For your convenience, we are including a link below to the PDF version on the Instrument Specialties website for download.

---

Download the PDF version of this reference sheet
from the Instrument Specialties website here.

---

This guide is just for reference. Consultation with a qualified applications specialist prior to the selection or installation of any hazardous area product is strongly suggested.

For more information, contact Instrument Specialties, Inc. by calling 407-324-7800 or by visiting http://isi.group

Lightning and Surge Protection for Potentially Explosive Atmospheres

Protect your plant's hazardous area
from lightning strikes and surges.

During producing, processing, storing and transporting flammable substances (e.g. fuel, alcohol, liquid gas, explosive dusts), potentially explosive atmospheres where no ignition sources may be present to prevent explosion frequently occur in chemical and petrochemical industrial plants. The relevant safety regulations describe the risk for such plants posed by atmospheric discharges (lightning strikes). In this context, it must be observed that there is a risk of re and explosion resulting from direct or indirect lightning discharge since in some cases these plants are widely distributed.

To ensure the required plant availability and safety, a conceptual procedure is required to protect parts of electrical and electronic installations of process plants from lightning currents and surges.

The white paper below, provided by DEHN,  provides an in-depth strategy on plant protection and safety from lightning strikes and surges in hazardous areas.

Lightning and Surge Protection for Potentially Explosive Atmospheres from Instrument Specialties, Inc.

For more information, contact:
Instrument Specialties Inc.
3885 St. Johns Parkway
Sanford, FL 32771
phone 407.324.7800
fax 407.324.1104

www.isisales.com
e-mail: offices@isisales.com

Helpful Hazardous Area Definitions for Process Control Instrumentation

Courtesy of SOR Pressure, Temperature, and Level Instruments

SOR Explosion Proof
Pressure Switch

Hazardous Area Classification

Hazardous Areas are locations where the potential for fire or explosion exists because of gases, dust, or easily ignitable fibers or flyings in the atmosphere.

In North America, hazardous area classification is separated by classes, divisions, and groups to define the level of safety required for equipment installed in these locations. Classes define the general form of the flammable materials in the atmosphere. Divisions define the probability of the presence of flammable materials. Groups classify the exact flammable nature of the material.

In Europe and countries outside of North America, classification of hazardous areas is accomplished differently. Zones are used to define the probability of the presence of flammable materials. Protection Types denote the level of safety for the device. Groups classify the exact flammable nature of the material. These groups are separated differently than North American Groups. Temperature Identifications convey the maximum surface temperature of the apparatus based on 104° F (40° C) ambient. These temperature codes are selected carefully not to exceed the ignition temperature of the specific gas or vapor to be encountered in the application.

Some hazardous area classifications are not shown here. For further detailed information, see specific standards published by approval organizations.

Classifications Inside North America

Classes
Class I	Flammable gases or vapors are present in the air in quantities sufficient to produce explosive or ignitable mixtures.
Class II	Combustible or conductive dusts are present.
Class III	Ignitable fibers or flyings are present, but not likely to be in suspension in sufficient quantities to produce ignitable mixtures. (Group classifications are not applied to this class.)

Divisions
Division 1	The substance referred to by class is present during normal conditions.
Division 2	The substance referred to by class is present only in abnormal conditions, such as a container failure or system breakdown.

Groups
Group A	Acetylene
Group B	Hydrogen (or gases of equivalent hazard)
Group C	Ethylene (or gases of equivalent hazard)
Group D	Gasoline (or gases of equivalent hazard)
Group E	Metal Dust
Group F	Coal Dust
Group G	Grain Dust

---

Classification Outside North America

Zones
Zone 0	Area in which an explosive gas-air mixture is continuously present or present for long periods.
Zone 1	Combustible or conductive dusts are present.Area in which an explosive gas-air mixture is likely to occur in normal operation.
Zone 2	Area in which an explosive gas-air mixture is not likely to occur, and if it occurs it will only exist for a short time.

Protection Types
		Zone
d	Flameproof (Explosion proof) Enclosure	1,2
e	Increased Safety	1,2
ia	Intrinsic Safety	0,1,2
ib	Intrinsic Safety	1,2
o	Oil Immersion	2
p	Pressurized Apparatus (Purged Apparatus)	1,2
q	Powder Filling (Sand Filling)	2
m	Encapsulation	1,2
n	Normally Nonsparking and/or Nonincendive Circuits)	2

Temperature Codes
	°F	°C
T1	842	450
T2	572	300
T3	392	200
T4	275	135
T5	212	100
T6	185	85

Groups
Group I	For application in below ground installations (mines) where methane (firedamp) and coal dust may be present.
Group IIA	For application in above ground installation where hazards due to propane may exist. This group most closely matches the North American Group D.
Group IIB	For application in above ground installations where hazards due to ethylene may exist. This group most closely matches the North American Group C.
Group IIC	For application in above ground installations where hazards due to hydrogen or acetylene may exist. This group most closely matches the North American Groups A and B.